The Power Styler is a revolution in blow drying hair!!
It’s an amazing ceramic attachment that clips into the end of your hairdryer nozzle (please see guide below to see the nozzle shapes that fit The Power Styler).
Ceramic has long been proven to be effective in the styling of hair because it evenly distributes heat creating no cold spots or over heated areas which could lead to the damage of hair.
The Power Styler is just so simple to use – clip on to your hair dryer nozzle and… well, that’s it! Blow dry your hair as normal!
What could be easier? No new techniques to learn or anything! Once clipped on to the nozzle, it improves your blow dry to give you incredible results.
It helps to create smoother, shinier, straighter, silkier hair in less time, because of the increased heat. When blow drying hair with The Power Styler attached, it helps to set the style for longer which means you need to blow dry and style less often!
The Power Styler has been cleverly designed to sit at the perfect angle to concentrate the airflow more than a regular nozzle and helps to direct the airflow downwards helping to seal the cuticle of the hair, creating shinier hair.
The Power Styler has take the hairdressing industry by storm – these are just some of the things that people are saying about The Power Styler:
“I have been using this for about 3 weeks now and my clients have been telling me the blow outs have been lasting longer.”
“I bought The Power Styler last week and it is worth the investment.”
“It truly does what it says, hair stays smooth and the bounce is fabulous.
I give this product 10/10″
Guide to nozzle shapes
Power Styler Instructions
To attach: Push and slide the clips at the bottom of The Power Styler firmly on to the end of your hairdryer nozzle, aligning the specially designed waves. Please note that the clips must attach onto the nozzle firmly. If the clips are not attached securely, please do not use until the clips have been tightened.
To style: Using a heat resistant brush use the hairdryer in the same way that you would normally, lightly touching the hair with The Power Styler, as you move down the hair.
To remove: Please wait until The Power Styler has totally cooled down and then place your thumbs onto the clips and push up and off the hairdryer nozzle. As with any hair styling tool, do not touch The Power Styler whilst it is hot. Let it cool down after use and before handling.
Warning: Do not start using your hairdryer until The Power Styler is firmly attached. If the clips feel at all loose, The Power Styler is not securely attached. To secure it, press the clips together firmly using your fingers until the clips tighten and grip onto the nozzle firmly. For an instructional video on how to do this, please visit www.daroko.com. Please check that the clips are secure and tight before each use. The Power Styler will fit onto the end of almost all flat, straight-edged hairdryer nozzles but it is the responsibility of the consumer to check that their nozzle is the correct shape to use with The Power Styler, before purchase. A guide can be found at www.daroko.com. As with any hair styling tool, do not touch The Power Styler whilst it is hot. Let it cool down after use and before handling.
The Power Styler is a ceramic coated hairdryer attachment that fits onto the end of straight edged, flat hairdryer nozzles.
The Power Styler helps to create shinier, smoother looking blow dries in less time, which last longer than usual.
The ceramic coated attachment heats up more than a regular plastic hairdryer nozzle which helps speed up the hair drying process and helps set your style for longer. The ceramic material helps smooth down the hair cuticle which helps create smoother and shinier looking hair.
The Power Styler has been cleverly designed with repositionable clips. Simply slide these clips onto the end of your nozzle. If needed, the clips can be moved further apart or closer together to fit your hairdryer nozzle. However, the placement of the clips when your first receive The Power Styler should suit the majority of hairdryer nozzles. Please view our video on http://youtu.be/1AWBF0NqiuQ
When used correctly, The Power Styler would not damage your hair any more than a regular hairdryer and in fact tests have shown that because you need to blow dry your hair for LESS time, it could actually be better for your hair.
The Power Styler has been created to fit all nozzles with a flat, straight edge so that when you look at it from the sides A) the lines are parallel and B) The top 6mm are flat the entire width of the nozzle. See guide above. (Please note that it is the buyers responsibility to check that you have a suitable nozzle that will fit The Power Styler – refunds will not be given based on an incorrectly fitting nozzle) If you have any questions as to whether your nozzle will fit The Power Styler, please contact us on email: [email protected]
Unfortunately in this case we would advise you not to buy The Power Styler and if/when you purchase another hairdryer, consider purchasing one with a suitable nozzle. It is difficult to achieve a universal product as every hairdryer nozzle can have a slightly different shape therefore we specify that the nozzle should be straight-edged and the top 6mm should be flat the entire width of the nozzle. Please see guide above for clarification.
There is no need to remove The Power Styler after use, simply leave it attached ready for the next time you blow dry your hair. However, should you wish to remove The Power Styler, wait until it has totally cooled down to touch. Then simply place your thumbs on both of the clips and slowly but firmly push up and off the nozzle. Then store them safely in the original packaging until you next blow dry your hair.
We are in the process of speaking with distributors before rolling out to stores so for the moment you can buy The Power Styler from this website on the “Buy Now” page. Keep checking back on our websites for updates.
If your order is ‘in Stock’ your order will be sent out within 2-3 days of your order (although will usually be sent out the next day).
If however we are ‘out of stock’ then please be advised as to which day your order will be sent out from. We will always endeavour to send out orders immediately.
Please ensure your nozzle is the correct shape using our image guide. Your nozzle should have a straight edge and the top 6mm should be completely flat the entire width of the nozzle.
To correctly remove The Power Styler from your hairdryer nozzle, wait until The Power Styler has totally cooled down. Then place both your thumbs onto the clips and slowly but firmly press up and off the nozzle. This should ensure you remove The Power Styler correctly.
The Power Styler has been created with specially designed clips that allow people to loosen or tighten the clips to fit their own individual hairdryer. Should you find that The Power Styler is not securely attached, do not continue to use it. Take The Power Styler off the nozzle and press the clips together firmly using your fingers or alternatively you can use a pair of pliers to gently press the clips together – the slightest press should tighten the clips enough to attach them strongly to your hairdryer nozzle. Please see our video http://youtu.be/m9EQ_qTOGwc
Occasionally through putting The Power Styler on and off a hairdryer, the clips can loosen slightly. Do not work The Power Styler is the clips are loose. Take The Power Styler off the clips and press the opening firmly together using your fingers or alternatively you can use a pair of pliers to gently press the clips together – the slightest press should tighten the clips enough to attach them strongly to the coloured section of The Power Styler.
In each purchase you will receive 2 coloured plates and on each coloured plate there will be two black clips. Within the tube packaging you will also receive instructions.
Thicker than 2mm nozzle click
Daroko Ltd has a full-time sales and support team so don’t hesitate to contact us. We’re always here to provide expert advice and tips.
For enquiries about The Power Styler please contact:
For enquiries about the Fresh Wigs drying unit please contact: [email protected]
Tel: +44 207 096 1091
Opening Hours: Monday – Friday 9am – 5pm